Knowledge Base

  Does my non concussive tap have an adjustable flow time?
  

The only tap within the non-concussive tap range with an adjustable flow time is the NC177CP

  What’s the minimum operating pressure of Inta non-concussive taps?
  

0.2 bar dynamic.

  Can the flow rate on my tap be reduced?
  

Yes there is a range of flow regulators available for our non-concussive taps, please contact our technical department for part codes and descriptions. Flow regulators are inserted into the inlet tail of the tap.

  What is the warranty period on non-concussive taps?
  

Our commercial range is covered by a 12 month guarantee against any manufacturing fault.

  How do I service my non concussive tap?
  

Servicing instructions are available on request from the technical department.

  How do you recommend cleaning the surface of my tap without damaging the finish?
  

Inta taps have a high quality finish and should be treated with care. An occasional wipe with a mild washing-up liquid on a soft damp cloth followed by a thorough rinsing is all that is required. Do not use an abrasive or chemical household cleaner as this may cause damage to the surface finish.

  Are any Inta non concussive taps that are WRAS approved? If so which ones?
  

Please see all WRAS approved Non Concussive taps below:

{"controller"=>"articles", "action"=>"index", "category_id"=>"2", "category_name"=>"non concussive taps"}